--- rat/lonratedt.pm 2002/05/21 18:18:07 1.25 +++ rat/lonratedt.pm 2004/04/26 16:56:26 1.57 @@ -1,7 +1,7 @@ # The LearningOnline Network with CAPA # Edit Handler for RAT Maps # -# $Id: lonratedt.pm,v 1.25 2002/05/21 18:18:07 www Exp $ +# $Id: lonratedt.pm,v 1.57 2004/04/26 16:56:26 www Exp $ # # Copyright Michigan State University Board of Trustees # @@ -25,20 +25,155 @@ # # http://www.lon-capa.org/ # -# (TeX Content Handler -# -# 05/29/00,05/30 Gerd Kortemeyer) -# 7/1,6/30 Gerd Kortemeyer + package Apache::lonratedt; +=pod + +=head1 NAME + +Apache::lonratedt: advanced resource assembly tool + +=head1 SYNOPSIS + +lonratedt provides the routines and the handler for the Advanced + Resource Assembly Tool (RAT), and ties the various pieces together + with Javascript. + +=head1 OVERVIEW + +=head2 Map Representation + +=begin latex + +% +\begin{figure} +\begin{center}\includegraphics[% + width=0.55\paperwidth,bb = 0 0 200 100, draft, type=eps]{Map_Example}\end{center} + + +\caption{\label{Map_In_Advanced_Editor}Example of a Map in the Advanced Editor} +\end{figure} +% +\begin{figure} +\begin{lyxcode} + + +~~ + +~~~~ + +~~ + +~~~~ + +~~ + +~~~~ + +~~ + +~~~~ + +~~ + +~~~~ + +~~ + +~~~~ + +~~ + +~~ + +~~ + +~~ + +~~ +\end{lyxcode} + +\caption{\label{XML}XML for Map in Figure \ref{Map_In_Advanced_Editor}} +\end{figure} + +=end latex + +Fig. "XML for Map in Figure" shows the XML representation of the +resource map shown in Fig. "Example of a Map in the Advanced Editor", +which is the format in which maps are stored. In the figure, however, +additional graphical map layout information generated by the Advanced +Resource Assembly Tool is not displayed. This graphical information is +optional to re-generate the same graphical layout when the map is +brought up again in the Resource Assembly Tool, and is not needed for +any other system functionality. + +Maps can be generated by tools other than the Resource Assembly +Tool. In particular, an author might have some other representation of +a course sequence, which can be converted into a map using scripts. If +this map then were to be brought up in the Resource Assembly Tool, the +Tool would automatically generate a graphical layout for it. Each +entry of the map (resources, conditions and links) is stored in a +separate tag. + +Resources and conditionsX have to have unique ID +numbers. These numbers are automatically generated by the Resource +Assembly Tool when the entry is first created, or added to the entries +when a map generated outside the Resource Assembly Tool is first +retrieved. They can also be assigned by custom scripts or added in by +hand. + +In the XML example, entry 1 is the start resource of the map. When +this map is accessed, the source (src) URL of this tag will be the +first resource rendered. Entry 2 is the finish resource of this +map. This resource will be the last resource in the sequence of +resources. Entry 6 is a problem resource with the given URL and title, +as well as the priority "mandatory". Entry 19 is a condition, which is +used by the link between entries 6, the problem, and 9, a +sequence. I + +=cut + use strict; use Apache::Constants qw(:common); use Apache::lonnet; use Apache::lonratsrv; +use Apache::lonsequence; +use Apache::loncommon; +use Apache::lonlocal; +use File::Copy; -my @order; -my @resources; +use vars qw(@order @resources @resparms); # Mapread read maps into global arrays @links and @resources, determines status @@ -67,6 +202,13 @@ sub mapread { if ($command eq 'objlinks') { $links[$number]=$content; } + if ($command eq 'objparms') { + if ($resparms[$number]) { + $resparms[$number].='&&&'.$content; + } else { + $resparms[$number]=$content; + } + } } # ------------------------------------------------------- Is this a linear map? my @starters=(); @@ -79,13 +221,13 @@ sub mapread { my ($start,$end,$cond)=split(/\:/,$_); if ((defined($starters[$start])) || (defined($endings[$end]))) { return - ('Map has branchings. Use advanced editor.',1); + (&mt('Map has branchings. Use advanced editor.'),1); } $starters[$start]=1; $endings[$end]=1; if ($cond) { return - ('Map has conditions. Use advanced editor.',1); + (&mt('Map has conditions. Use advanced editor.'),1); } } @@ -94,11 +236,16 @@ sub mapread { if (defined($resources[$i])) { unless (($starters[$i]) || ($endings[$i])) { return - ('Map has unconnected resources. Use advanced editor.',1); + (&mt('Map has unconnected resources. Use advanced editor.'),1); } } } - +# ---------------------------------------------- Did we just read an empty map? + if ($#resources<1) { + undef $resources[0]; + $resources[1]=':::start'; + $resources[2]=':::finish'; + } # -------------------------------------------------- This is a linear map, sort my $startidx=0; @@ -129,7 +276,9 @@ sub mapread { } # ---------------------------------------------- Read a map as well as possible - +# Also used by the sequence handler +# Call lonsequence::attemptread to read from resource space +# sub attemptread { my $fn=shift; @@ -266,12 +415,15 @@ sub buttons { my $adv=shift; my $output='
'; if ($adv==1) { - $output.=''; + $output.=''. + &Apache::loncommon::help_open_topic('Sequence_Advanced_Editor_Creation');; } else { unless ($adv==2) { - $output.=''; + $output.=''. + &Apache::loncommon::help_open_topic('Sequence_Simple_Editor_Creation'); } - $output.=''; + $output.=''. + &Apache::loncommon::help_open_topic('Sequence_Advanced_Editor_Creation'); } return $output.'

'; } @@ -293,6 +445,7 @@ sub pastetarget { my $ext='false'; if ($url=~/^http\:\/\//) { $ext='true'; } $url=~s/\:/\:/g; + $name=~s/\:/\:/g; $resources[$idx]=$name.':'.$url.':'.$ext.':normal:res'; } } @@ -305,21 +458,56 @@ sub pastetarget { # modifies @resources sub startfinish { +# Remove all start and finish foreach (@order) { my ($name,$url,$ext)=split(/\:/,$resources[$_]); if ($url=~/http\&colon\:\/\//) { $ext='true'; } $resources[$_]=$name.':'.$url.':'.$ext.':normal:res'; } +# Garbage collection + my $stillchange=1; + while (($#order>1) && ($stillchange)) { + $stillchange=0; + for (my $i=0;$i<=$#order;$i++) { + my ($name,$url,$ext)=split(/\:/,$resources[$order[$i]]); + unless ($url) { +# Take out empty resource + for (my $j=$i+1;$j<=$#order;$j++) { + $order[$j-1]=$order[$j]; + } + $#order--; + $stillchange=1; + last; + } + } + } +# Put in a start resource my ($name,$url,$ext)=split(/\:/,$resources[$order[0]]); $resources[$order[0]]=$name.':'.$url.':'.$ext.':start:res'; - my ($name,$url,$ext)=split(/\:/,$resources[$order[$#order]]); +# Make sure this has at least start and finish + if ($#order==0) { + $resources[$#resources+1]='::false'; + $order[1]=$#resources; + } +# Make the last one a finish resource + ($name,$url,$ext)=split(/\:/,$resources[$order[$#order]]); $resources[$order[$#order]]=$name.':'.$url.':'.$ext.':finish:res'; } # ------------------------------------------------------------------- Store map sub storemap { - my $fn=shift; + my $realfn=shift; + my $fn=$realfn; +# unless this is forced to work from the original file, use a temporary file +# instead + unless (shift) { + $fn=$realfn.'.tmp'; + unless (-e $fn) { + copy($realfn,$fn); + } + } +# store data either into tmp or real file &startfinish(); my $output='graphdef<:>no'; my $k=1; @@ -327,6 +515,13 @@ sub storemap { if (defined($resources[$order[$i]])) { $output.='<&>objcont<:>'.$order[$i].'<:>'.$resources[$order[$i]]; } + if (defined($resparms[$order[$i]])) { + foreach (split('&&&',$resparms[$order[$i]])) { + if ($_) { + $output.='<&>objparms<:>'.$order[$i].'<:>'.$_; + } + } + } if (defined($order[$i+1])) { if (defined($resources[$order[$i+1]])) { $output.='<&>objlinks<:>'.$k.'<:>'. @@ -341,23 +536,202 @@ sub storemap { &Apache::lonratsrv::loadmap($fn,&Apache::lonratsrv::savemap($fn,'')); } +# ------------------------------------------ Store and get parameters in global + +sub storeparameter { + my ($to,$name,$value,$ptype)=@_; + my $newentry=''; + my $nametype=''; + foreach (split('&&&',$resparms[$to])) { + my ($thistype,$thisname,$thisvalue)=split('___',$_); + if ($thisname) { + unless ($thisname eq $name) { + $newentry.=$_.'&&&'; + } else { + $nametype=$thistype; + } + } + } + unless ($ptype) { $ptype=$nametype; } + unless ($ptype) { $ptype='string'; } + $newentry.=$ptype.'___'.$name.'___'.$value; + $resparms[$to]=$newentry; +} + +sub delparameter { + my ($to,$name)=@_; + my $newentry=''; + my $nametype=''; + foreach (split('&&&',$resparms[$to])) { + my ($thistype,$thisname,$thisvalue)=split('___',$_); + if ($thisname) { + unless ($thisname eq $name) { + $newentry.=$_.'&&&'; + } + } + } + $resparms[$to]=$newentry; +} + +sub getparameter { + my ($to,$name); + my $value=undef; + my $ptype=undef; + foreach (split('&&&',$resparms[$to])) { + my ($thistype,$thisname,$thisvalue)=split('___',$_); + if ($thisname eq $name) { + $value=$thisvalue; + $ptype=$thistype; + } + } + return ($value,$ptype); +} + +# ----------------------------------------------------------------- Edit script +sub editscript { + my $mode=shift; + my $resurl=&Apache::loncommon::lastresurl(); + return(<'.&mt('You are working with an unsaved version of your map.').'
'; + my ($errtext,$fatal)=&mapread($tmpfn,''); + } # ---------------------------------------------------------- Process form input my @importselect=(); my @targetselect=(); undef @importselect; undef @targetselect; - if (defined($ENV{'form.import'})) { - if (ref($ENV{'form.import'})) { - @importselect=sort(@{$ENV{'form.import'}}); + if (defined($ENV{'form.importsel'})) { + if (ref($ENV{'form.importsel'})) { + @importselect=sort(@{$ENV{'form.importsel'}}); } else { - @importselect=($ENV{'form.import'}); + @importselect=($ENV{'form.importsel'}); } } if (defined($ENV{'form.target'})) { @@ -441,7 +815,7 @@ sub smpedt { } foreach ( - &attemptread(&Apache::lonnet::filelocation('',$ENV{'form.importmap'}))) { + &Apache::lonsequence::attemptread(&Apache::lonnet::filelocation('',$ENV{'form.importmap'}))) { my ($name,$url)=split(/\:/,$_); if ($url) { $importdetail.='&'.&Apache::lonnet::escape($name).'='. @@ -533,12 +907,43 @@ sub smpedt { } &pastetarget($lastsel,@newsequence); &storemap(&Apache::lonnet::filelocation('',$url)); -# ------------------------------------------------ +# -------------------------------------------------------------------- Move up + } elsif ($ENV{'form.moveup'}) { + foreach (sort @targetselect) { + if ($_-1>0) { + my $movethis=$order[$_-1]; + $order[$_-1]=$order[$_-2]; + $order[$_-2]=$movethis; + } + } + &storemap(&Apache::lonnet::filelocation('',$url)); +# ------------------------------------------------------------------ Move down + } elsif ($ENV{'form.movedown'}) { + foreach (reverse sort @targetselect) { + if ($_-1<$#order) { + my $movethis=$order[$_-1]; + $order[$_-1]=$order[$_]; + $order[$_]=$movethis; + } + } + &storemap(&Apache::lonnet::filelocation('',$url)); +# --------------------------------------------------------------------- Rename + } elsif ($ENV{'form.renameres'}) { + my $residx=$Apache::lonratedt::order[$ENV{'form.renameidx'}-1]; + my ($name,@resrest)=split(/\:/,$Apache::lonratedt::resources[$residx]); + $name=$ENV{'form.renametitle'}; + $name=~s/\:/\&colon\;/g; + $Apache::lonratedt::resources[$residx]=$name.':'.join(':',@resrest); + &storemap(&Apache::lonnet::filelocation('',$url)); } # ------------------------------------------------------------ Assemble windows my $idx=-1; - my $importwindow=join("\n",map { + $importdetail='&'.$importdetail; + $importdetail=~s/^\&+/\&/; + my $importwindow= + ''. + join("\n",map { $idx++; if ($_) { my ($name,$url)=split(/\=/,$_); @@ -550,123 +955,52 @@ sub smpedt { } split(/\&/,$importdetail)); $idx=0; - my $targetwindow=join("\n",map { + $targetdetail=''; + my $targetwindow= + ''. + join("\n",map { my ($name,$url)=split(/\:/,$resources[$_]); unless ($name) { $name=(split(/\//,$url))[-1]; } unless ($name) { $name='EMPTY'; } $targetdetail.='&'.&Apache::lonnet::escape($name).'='. &Apache::lonnet::escape($url); $idx++; + $name=~s/\:/\:/g; ''; } @order); # ----------------------------------------------------- Start simple RAT screen + my $editscript=&editscript('simple'); + my $bodytag=&Apache::loncommon::bodytag(undef,undef,undef,1). + &Apache::loncommon::help_open_topic('Sequence_Simple_Editor_Creation'). + &Apache::loncommon::help_open_faq(6). + &Apache::loncommon::help_open_bug('RAT'); + my %lt=&Apache::lonlocal::texthash( + 'sa' => 'Save', + 'nt' => 'New Title', + 'se' => 'Search', + 'im' => 'Import', + 'vi' => 'View', + 'lm' => 'Load Map', + 'ds' => 'Discard Selected', + 'ca' => 'Clear All', + 'ta' => 'Temporary Assembly Workspace', + 'rv' => 'Revert to Last Saved', + 'sa' => 'Save', + 'mu' => 'Move Up', + 'md' => 'Move Down', + 're' => 'Rename', + 'as' => 'after selected', + 'cs' => 'Cut selected', + 'ps' => 'Copy selected', + 'pas' => 'Paste after selected', + ); $r->print(< - +$bodytag $buttons $errtext
+ + + - + - + - -
Import
$lt{'ta'}  Target
File: $url
- - -after selected + + +$lt{'as'}

- - - +value="Select Map">
+ + +
  +"javascript:impfortarget.value=1;groupsearch()" value="$lt{'se'}"> -after selected -
+"javascript:impfortarget.value=1;groupimport();" value="$lt{'im'}"> +$lt{'as'} +
+ + + +
$targetmsg + + +
-Cut selected
+$lt{'cs'}


-Copy selected
+$lt{'ps'}


-Paste after selected
+$lt{'pas'}
@@ -764,12 +1128,22 @@ ENDNODIR sub viewmap { my ($r,$url,$adv,$errtext)=@_; - $r->print(''.&buttons($adv)); + $r->print(''. + &Apache::loncommon::bodytag('Edit Content of a Map'). + &Apache::loncommon::help_open_faq(6). + &Apache::loncommon::help_open_bug('RAT'). + &buttons($adv)); if ($errtext) { - $r->print($errtext.'
'); + $r->print($errtext.'
'); + } + my $idx=0; + $r->print('

'.$url.'

'); + if ($adv) { + $r->print('

'.&mt('Map contents are not shown in order.').'


'); } foreach (&attemptread(&Apache::lonnet::filelocation('',$url))) { if (defined($_)) { + $idx++; my ($title,$url)=split(/\:/,$_); $title=~s/\&colon\;/\:/g; $url=~s/\&colon\;/\:/g; @@ -780,7 +1154,7 @@ sub viewmap { } $r->print(&Apache::lonratsrv::qtescape($title)); if ($url) { $r->print(''); } - $r->print('
'); + $r->print('
'); } } $r->print(''); @@ -790,11 +1164,17 @@ sub viewmap { sub handler { my $r=shift; - $r->content_type('text/html'); + &Apache::loncommon::content_type($r,'text/html'); $r->send_http_header; return OK if $r->header_only; - + my $target = $ENV{'form.grade_target'}; + if ($target eq 'meta') { + &Apache::loncommon::content_type($r,'text/html'); + $r->send_http_header; + return OK; + } + my $url=$r->uri; my $fn=&Apache::lonnet::filelocation('',$url);