--- rat/lonratedt.pm 2002/05/13 19:38:32 1.14
+++ rat/lonratedt.pm 2004/04/26 17:50:37 1.58
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# Edit Handler for RAT Maps
#
-# $Id: lonratedt.pm,v 1.14 2002/05/13 19:38:32 www Exp $
+# $Id: lonratedt.pm,v 1.58 2004/04/26 17:50:37 www Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -25,20 +25,155 @@
#
# http://www.lon-capa.org/
#
-# (TeX Content Handler
-#
-# 05/29/00,05/30 Gerd Kortemeyer)
-# 7/1,6/30 Gerd Kortemeyer
+
package Apache::lonratedt;
+=pod
+
+=head1 NAME
+
+Apache::lonratedt: advanced resource assembly tool
+
+=head1 SYNOPSIS
+
+lonratedt provides the routines and the handler for the Advanced
+ Resource Assembly Tool (RAT), and ties the various pieces together
+ with Javascript.
+
+=head1 OVERVIEW
+
+=head2 Map Representation
+
+=begin latex
+
+%
+\begin{figure}
+\begin{center}\includegraphics[%
+ width=0.55\paperwidth,bb = 0 0 200 100, draft, type=eps]{Map_Example}\end{center}
+
+
+\caption{\label{Map_In_Advanced_Editor}Example of a Map in the Advanced Editor}
+\end{figure}
+%
+\begin{figure}
+\begin{lyxcode}
+
+\end{lyxcode}
+
+\caption{\label{XML}XML for Map in Figure \ref{Map_In_Advanced_Editor}}
+\end{figure}
+
+=end latex
+
+Fig. "XML for Map in Figure" shows the XML representation of the
+resource map shown in Fig. "Example of a Map in the Advanced Editor",
+which is the format in which maps are stored. In the figure, however,
+additional graphical map layout information generated by the Advanced
+Resource Assembly Tool is not displayed. This graphical information is
+optional to re-generate the same graphical layout when the map is
+brought up again in the Resource Assembly Tool, and is not needed for
+any other system functionality.
+
+Maps can be generated by tools other than the Resource Assembly
+Tool. In particular, an author might have some other representation of
+a course sequence, which can be converted into a map using scripts. If
+this map then were to be brought up in the Resource Assembly Tool, the
+Tool would automatically generate a graphical layout for it. Each
+entry of the map (resources, conditions and links) is stored in a
+separate tag.
+
+Resources and conditionsX have to have unique ID
+numbers. These numbers are automatically generated by the Resource
+Assembly Tool when the entry is first created, or added to the entries
+when a map generated outside the Resource Assembly Tool is first
+retrieved. They can also be assigned by custom scripts or added in by
+hand.
+
+In the XML example, entry 1 is the start resource of the map. When
+this map is accessed, the source (src) URL of this tag will be the
+first resource rendered. Entry 2 is the finish resource of this
+map. This resource will be the last resource in the sequence of
+resources. Entry 6 is a problem resource with the given URL and title,
+as well as the priority "mandatory". Entry 19 is a condition, which is
+used by the link between entries 6, the problem, and 9, a
+sequence. I
+
+=cut
+
use strict;
use Apache::Constants qw(:common);
use Apache::lonnet;
use Apache::lonratsrv;
+use Apache::lonsequence;
+use Apache::loncommon;
+use Apache::lonlocal;
+use File::Copy;
-my @order=();
-my @resources=();
+use vars qw(@order @resources @resparms);
# Mapread read maps into global arrays @links and @resources, determines status
@@ -52,6 +187,10 @@ sub mapread {
undef @links;
undef @resources;
undef @order;
+ undef @resparms;
+ @resources=('');
+ @order=();
+ @resparms=();
my ($outtext,$errtext)=&Apache::lonratsrv::loadmap($fn,'');
if ($errtext) { return ($errtext,2); }
@@ -65,6 +204,13 @@ sub mapread {
if ($command eq 'objlinks') {
$links[$number]=$content;
}
+ if ($command eq 'objparms') {
+ if ($resparms[$number]) {
+ $resparms[$number].='&&&'.$content;
+ } else {
+ $resparms[$number]=$content;
+ }
+ }
}
# ------------------------------------------------------- Is this a linear map?
my @starters=();
@@ -77,26 +223,31 @@ sub mapread {
my ($start,$end,$cond)=split(/\:/,$_);
if ((defined($starters[$start])) || (defined($endings[$end]))) {
return
- ('Map has branchings. Use advanced editor.',1);
+ (&mt('Map has branchings. Use advanced editor.'),1);
}
$starters[$start]=1;
$endings[$end]=1;
if ($cond) {
return
- ('Map has conditions. Use advanced editor.',1);
+ (&mt('Map has conditions. Use advanced editor.'),1);
}
}
}
- for (my $i=0; $i<=$#resources; $i++) {
+ for (my $i=1; $i<=$#resources; $i++) {
if (defined($resources[$i])) {
unless (($starters[$i]) || ($endings[$i])) {
return
- ('Map has unconnected resources. Use advanced editor.',1);
+ (&mt('Map has unconnected resources. Use advanced editor.'),1);
}
}
}
-
+# ---------------------------------------------- Did we just read an empty map?
+ if ($#resources<1) {
+ undef $resources[0];
+ $resources[1]=':::start';
+ $resources[2]=':::finish';
+ }
# -------------------------------------------------- This is a linear map, sort
my $startidx=0;
@@ -126,6 +277,119 @@ sub mapread {
return $errtext;
}
+# ---------------------------------------------- Read a map as well as possible
+# Also used by the sequence handler
+# Call lonsequence::attemptread to read from resource space
+#
+sub attemptread {
+ my $fn=shift;
+
+ my @links;
+ undef @links;
+ my @theseres;
+ undef @theseres;
+
+ my ($outtext,$errtext)=&Apache::lonratsrv::loadmap($fn,'');
+ if ($errtext) { return @theseres }
+
+# -------------------------------------------------------------------- Read map
+ foreach (split(/\<\&\>/,$outtext)) {
+ my ($command,$number,$content)=split(/\<\:\>/,$_);
+ if ($command eq 'objcont') {
+ $theseres[$number]=$content;
+ }
+ if ($command eq 'objlinks') {
+ $links[$number]=$content;
+ }
+ }
+
+# --------------------------------------------------------------- Sort, sort of
+
+ my @objsort=();
+ undef @objsort;
+
+ my @data1=();
+ my @data2=();
+ undef @data1;
+ undef @data2;
+
+ my $k;
+ my $kj;
+ my $j;
+ my $ij;
+
+ for ($k=1;$k<=$#theseres;$k++) {
+ if (defined($theseres[$k])) {
+ $objsort[$#objsort+1]=$k;
+ }
+ }
+
+ for ($k=1;$k<=$#links;$k++) {
+ if (defined($links[$k])) {
+ @data1=split(/\:/,$links[$k]);
+ $kj=-1;
+ for (my $j=0;$j<=$#objsort;$j++) {
+ if ((split(/\:/,$objsort[$j]))[0]==$data1[0]) {
+ $kj=$j;
+ }
+ }
+ if ($kj!=-1) { $objsort[$kj].=':'.$data1[1]; }
+ }
+ }
+ for ($k=0;$k<=$#objsort;$k++) {
+ for ($j=0;$j<=$#objsort;$j++) {
+ if ($k!=$j) {
+ @data1=split(/\:/,$objsort[$k]);
+ @data2=split(/\:/,$objsort[$j]);
+ my $dol=$#data1+1;
+ my $dtl=$#data2+1;
+ if ($dol+$dtl<1000) {
+ for ($kj=1;$kj<$dol;$kj++) {
+ if ($data1[$kj]==$data2[0]) {
+ for ($ij=1;$ij<$dtl;$ij++) {
+ $data1[$#data1+1]=$data2[$ij];
+ }
+ }
+ }
+ for ($kj=1;$kj<$dtl;$kj++) {
+ if ($data2[$kj]==$data1[0]) {
+ for ($ij=1;$ij<$dol;$ij++) {
+ $data2[$#data2+1]=$data1[$ij];
+ }
+ }
+ }
+ $objsort[$k]=join(':',@data1);
+ $objsort[$j]=join(':',@data2);
+ }
+ }
+ }
+ }
+# ---------------------------------------------------------------- Now sort out
+
+ @objsort=sort {
+ my @data1=split(/\:/,$a);
+ my @data2=split(/\:/,$b);
+ my $rvalue=0;
+ my $k;
+ for ($k=1;$k<=$#data1;$k++) {
+ if ($data1[$k]==$data2[0]) { $rvalue--; }
+ }
+ for ($k=1;$k<=$#data2;$k++) {
+ if ($data2[$k]==$data1[0]) { $rvalue++; }
+ }
+ if ($rvalue==0) { $rvalue=$#data2-$#data1; }
+ $rvalue;
+ } @objsort;
+
+ my @outres=();
+ undef @outres;
+
+ for ($k=0;$k<=$#objsort;$k++) {
+ $outres[$k]=$theseres[(split(/\:/,$objsort[$k]))[0]];
+ }
+ return @outres;
+}
+
# --------------------------------------------------------- Build up RAT screen
sub ratedt {
my ($r,$url)=@_;
@@ -153,36 +417,328 @@ sub buttons {
my $adv=shift;
my $output='';
}
+# ----------------------------------------------------------- Paste into target
+# modifies @order, @resources
+
+sub pastetarget {
+ my ($after,@which)=@_;
+ my @insertorder=();
+ foreach (@which) {
+ if (defined($_)) {
+ my ($name,$url)=split(/\=/,$_);
+ $name=&Apache::lonnet::unescape($name);
+ $url=&Apache::lonnet::unescape($url);
+ if ($url) {
+ my $idx=$#resources+1;
+ $insertorder[$#insertorder+1]=$idx;
+ my $ext='false';
+ if ($url=~/^http\:\/\//) { $ext='true'; }
+ $url=~s/\:/\:/g;
+ $name=~s/\:/\:/g;
+ $resources[$idx]=$name.':'.$url.':'.$ext.':normal:res';
+ }
+ }
+ }
+ my @oldorder=splice(@order,$after);
+ @order=(@order,@insertorder,@oldorder);
+}
+
+# ------------------------------------------------ Get start and finish correct
+# modifies @resources
+
+sub startfinish {
+# Remove all start and finish
+ foreach (@order) {
+ my ($name,$url,$ext)=split(/\:/,$resources[$_]);
+ if ($url=~/http\&colon\:\/\//) { $ext='true'; }
+ $resources[$_]=$name.':'.$url.':'.$ext.':normal:res';
+ }
+# Garbage collection
+ my $stillchange=1;
+ while (($#order>1) && ($stillchange)) {
+ $stillchange=0;
+ for (my $i=0;$i<=$#order;$i++) {
+ my ($name,$url,$ext)=split(/\:/,$resources[$order[$i]]);
+ unless ($url) {
+# Take out empty resource
+ for (my $j=$i+1;$j<=$#order;$j++) {
+ $order[$j-1]=$order[$j];
+ }
+ $#order--;
+ $stillchange=1;
+ last;
+ }
+ }
+ }
+# Put in a start resource
+ my ($name,$url,$ext)=split(/\:/,$resources[$order[0]]);
+ $resources[$order[0]]=$name.':'.$url.':'.$ext.':start:res';
+# Make sure this has at least start and finish
+ if ($#order==0) {
+ $resources[$#resources+1]='::false';
+ $order[1]=$#resources;
+ }
+# Make the last one a finish resource
+ ($name,$url,$ext)=split(/\:/,$resources[$order[$#order]]);
+ $resources[$order[$#order]]=$name.':'.$url.':'.$ext.':finish:res';
+}
+
+# ------------------------------------------------------------------- Store map
+
+sub storemap {
+ my $realfn=shift;
+ my $fn=$realfn;
+# unless this is forced to work from the original file, use a temporary file
+# instead
+ unless (shift) {
+ $fn=$realfn.'.tmp';
+ unless (-e $fn) {
+ copy($realfn,$fn);
+ }
+ }
+# store data either into tmp or real file
+ &startfinish();
+ my $output='graphdef<:>no';
+ my $k=1;
+ for (my $i=0; $i<=$#order; $i++) {
+ if (defined($resources[$order[$i]])) {
+ $output.='<&>objcont<:>'.$order[$i].'<:>'.$resources[$order[$i]];
+ }
+ if (defined($resparms[$order[$i]])) {
+ foreach (split('&&&',$resparms[$order[$i]])) {
+ if ($_) {
+ $output.='<&>objparms<:>'.$order[$i].'<:>'.$_;
+ }
+ }
+ }
+ if (defined($order[$i+1])) {
+ if (defined($resources[$order[$i+1]])) {
+ $output.='<&>objlinks<:>'.$k.'<:>'.
+ $order[$i].':'.$order[$i+1].':0';
+ $k++;
+ }
+ }
+ }
+ $output=~s/http\&colon\;\/\///g;
+ $ENV{'form.output'}=$output;
+ return
+ &Apache::lonratsrv::loadmap($fn,&Apache::lonratsrv::savemap($fn,''));
+}
+
+# ------------------------------------------ Store and get parameters in global
+
+sub storeparameter {
+ my ($to,$name,$value,$ptype)=@_;
+ my $newentry='';
+ my $nametype='';
+ foreach (split('&&&',$resparms[$to])) {
+ my ($thistype,$thisname,$thisvalue)=split('___',$_);
+ if ($thisname) {
+ unless ($thisname eq $name) {
+ $newentry.=$_.'&&&';
+ } else {
+ $nametype=$thistype;
+ }
+ }
+ }
+ unless ($ptype) { $ptype=$nametype; }
+ unless ($ptype) { $ptype='string'; }
+ $newentry.=$ptype.'___'.$name.'___'.$value;
+ $resparms[$to]=$newentry;
+}
+
+sub delparameter {
+ my ($to,$name)=@_;
+ my $newentry='';
+ my $nametype='';
+ foreach (split('&&&',$resparms[$to])) {
+ my ($thistype,$thisname,$thisvalue)=split('___',$_);
+ if ($thisname) {
+ unless ($thisname eq $name) {
+ $newentry.=$_.'&&&';
+ }
+ }
+ }
+ $resparms[$to]=$newentry;
+}
+
+sub getparameter {
+ my ($to,$name)=@_;
+ my $value=undef;
+ my $ptype=undef;
+ foreach (split('&&&',$resparms[$to])) {
+ my ($thistype,$thisname,$thisvalue)=split('___',$_);
+ if ($thisname eq $name) {
+ $value=$thisvalue;
+ $ptype=$thistype;
+ }
+ }
+ return ($value,$ptype);
+}
+
+# ----------------------------------------------------------------- Edit script
+sub editscript {
+ my $mode=shift;
+ my $resurl=&Apache::loncommon::lastresurl();
+ return(<Saving ... ';
+ copy($tmpfn,&Apache::lonnet::filelocation('',$url));
+ unlink($tmpfn);
+ my ($errtext,$fatal)=
+ &mapread(&Apache::lonnet::filelocation('',$url),'');
+ }
+ if ($ENV{'form.revert'}) {
+ $targetmsg='Reverting ... ';
+ unlink($tmpfn);
+ my ($errtext,$fatal)=
+ &mapread(&Apache::lonnet::filelocation('',$url),'');
+ }
+ if (-e $tmpfn) {
+ $targetmsg=
+ ''.&mt('You are working with an unsaved version of your map.').' ';
+ my ($errtext,$fatal)=&mapread($tmpfn,'');
+ }
# ---------------------------------------------------------- Process form input
my @importselect=();
my @targetselect=();
undef @importselect;
undef @targetselect;
- if (defined($ENV{'form.import'})) {
- if (ref($ENV{'form.import'})) {
- @importselect=sort($ENV->{'form.import'});
+ if (defined($ENV{'form.importsel'})) {
+ if (ref($ENV{'form.importsel'})) {
+ @importselect=sort(@{$ENV{'form.importsel'}});
} else {
- @importselect=($ENV{'form.import'});
+ @importselect=($ENV{'form.importsel'});
}
}
if (defined($ENV{'form.target'})) {
if (ref($ENV{'form.target'})) {
- @targetselect=sort($ENV->{'form.target'});
+ @targetselect=sort(@{$ENV{'form.target'}});
} else {
@targetselect=($ENV{'form.target'});
}
@@ -193,7 +749,7 @@ sub smpedt {
my $importdetail=$ENV{'form.curimpdetail'};
# ---------------------------------------------------- Importing from groupsort
- if ($ENV{'form.importdetail'}) {
+ if (($ENV{'form.importdetail'}) && (!$ENV{'form.impfortarget'})) {
$importdetail='';
my @curimport=split(/\&/,$ENV{'form.curimpdetail'});
@@ -209,8 +765,7 @@ sub smpedt {
for (my $i=0;$i<=$lastsel;$i++) {
my ($name,$url)=split(/\=/,$curimport[$i]);
if ($url) {
- $importdetail.='&'.&Apache::lonnet::escape($name).'='.
- &Apache::lonnet::escape($url);
+ $importdetail.='&'.$name.'='.$url;
}
}
@@ -219,8 +774,7 @@ sub smpedt {
for (my $i=$lastsel+1;$i<=$#curimport;$i++) {
my ($name,$url)=split(/\=/,$curimport[$i]);
if ($url) {
- $importdetail.='&'.&Apache::lonnet::escape($name).'='.
- &Apache::lonnet::escape($url);
+ $importdetail.='&'.$name.'='.$url;
}
}
$importdetail=~s/\&+/\&/g;
@@ -239,159 +793,321 @@ sub smpedt {
for (my $i=0;$i<=$#curimport;$i++) {
my ($name,$url)=split(/\=/,$curimport[$i]);
if ($url) {
+ $importdetail.='&'.$name.'='.$url;
+ }
+ }
+# --------------------------------------------------------- Loading another map
+ } elsif ($ENV{'form.loadmap'}) {
+ $importdetail='';
+ my @curimport=split(/\&/,$ENV{'form.curimpdetail'});
+
+ my $lastsel;
+
+ if (defined($importselect[-1])) {
+ $lastsel=$importselect[-1];
+ } else {
+ $lastsel=$#curimport;
+ }
+
+ for (my $i=0;$i<=$lastsel;$i++) {
+ my ($name,$url)=split(/\=/,$curimport[$i]);
+ if ($url) {
+ $importdetail.='&'.$name.'='.$url;
+ }
+ }
+
+ foreach (
+ &Apache::lonsequence::attemptread(&Apache::lonnet::filelocation('',$ENV{'form.importmap'}))) {
+ my ($name,$url)=split(/\:/,$_);
+ if ($url) {
$importdetail.='&'.&Apache::lonnet::escape($name).'='.
&Apache::lonnet::escape($url);
+ }
+ }
+
+ for (my $i=$lastsel+1;$i<=$#curimport;$i++) {
+ my ($name,$url)=split(/\=/,$curimport[$i]);
+ if ($url) {
+ $importdetail.='&'.$name.'='.$url;
+ }
+ }
+ $importdetail=~s/\&+/\&/g;
+ $importdetail=~s/^\&//;
+
+# ------------------------------------------------ Groupimport/search to target
+ } elsif ($ENV{'form.importdetail'}) {
+ my $lastsel;
+ if (defined($targetselect[-1])) {
+ $lastsel=$targetselect[-1];
+ } else {
+ $lastsel=$#order+1;
+ }
+ &pastetarget($lastsel,split(/\&/,$ENV{'form.importdetail'}));
+ &storemap(&Apache::lonnet::filelocation('',$url));
+# ------------------------------------------------------------------------- Cut
+ } elsif (($ENV{'form.cut'}) || ($ENV{'form.copy'})) {
+ $importdetail='';
+ my @curimport=split(/\&/,$ENV{'form.curimpdetail'});
+
+ my $lastsel;
+
+ if (defined($importselect[-1])) {
+ $lastsel=$importselect[-1];
+ } else {
+ $lastsel=$#curimport;
+ }
+
+ for (my $i=0;$i<=$lastsel;$i++) {
+ my ($name,$url)=split(/\=/,$curimport[$i]);
+ if ($url) {
+ $importdetail.='&'.$name.'='.$url;
}
}
-# ---------------------------
- }
-# ------------------------------------------------------------ Assemble windows
+ foreach (@targetselect) {
+ my ($name,$url)=split(/\:/,$resources[$order[$_-1]]);
+ if ($url) {
+ $importdetail.='&'.&Apache::lonnet::escape($name).'='.
+ &Apache::lonnet::escape($url);
+ }
+ }
+ for (my $i=$lastsel+1;$i<=$#curimport;$i++) {
+ my ($name,$url)=split(/\=/,$curimport[$i]);
+ if ($url) {
+ $importdetail.='&'.$name.'='.$url;
+ }
+ }
+ $importdetail=~s/\&+/\&/g;
+ $importdetail=~s/^\&//;
+
+ if ($ENV{'form.cut'}) {
+ my @neworder=();
+ for (my $i=0;$i<=$#order;$i++) {
+ my $include=1;
+ foreach (@targetselect) {
+ if ($_-1==$i) { $include=0; }
+ }
+ if ($include) { $neworder[$#neworder+1]=$order[$i]; }
+ }
+ @order=@neworder;
+ &storemap(&Apache::lonnet::filelocation('',$url));
+ }
+
+# ----------------------------------------------------------------------- Paste
+ } elsif ($ENV{'form.paste'}) {
+ my $lastsel;
+ if (defined($targetselect[-1])) {
+ $lastsel=$targetselect[-1];
+ } else {
+ $lastsel=$#order+1;
+ }
+ my @newsequence;
+ my @curimport=split(/\&/,$ENV{'form.curimpdetail'});
+ foreach (@importselect) {
+ $newsequence[$#newsequence+1]=$curimport[$_];
+ }
+ &pastetarget($lastsel,@newsequence);
+ &storemap(&Apache::lonnet::filelocation('',$url));
+# -------------------------------------------------------------------- Move up
+ } elsif ($ENV{'form.moveup'}) {
+ foreach (sort @targetselect) {
+ if ($_-1>0) {
+ my $movethis=$order[$_-1];
+ $order[$_-1]=$order[$_-2];
+ $order[$_-2]=$movethis;
+ }
+ }
+ &storemap(&Apache::lonnet::filelocation('',$url));
+# ------------------------------------------------------------------ Move down
+ } elsif ($ENV{'form.movedown'}) {
+ foreach (reverse sort @targetselect) {
+ if ($_-1<$#order) {
+ my $movethis=$order[$_-1];
+ $order[$_-1]=$order[$_];
+ $order[$_]=$movethis;
+ }
+ }
+ &storemap(&Apache::lonnet::filelocation('',$url));
+# --------------------------------------------------------------------- Rename
+ } elsif ($ENV{'form.renameres'}) {
+ my $residx=$Apache::lonratedt::order[$ENV{'form.renameidx'}-1];
+ my ($name,@resrest)=split(/\:/,$Apache::lonratedt::resources[$residx]);
+ $name=$ENV{'form.renametitle'};
+ $name=~s/\:/\&colon\;/g;
+ $Apache::lonratedt::resources[$residx]=$name.':'.join(':',@resrest);
+ &storemap(&Apache::lonnet::filelocation('',$url));
+ }
+# ------------------------------------------------------------ Assemble windows
+
my $idx=-1;
- my $importwindow=join("\n",map {
+ $importdetail='&'.$importdetail;
+ $importdetail=~s/^\&+/\&/;
+ my $importwindow=
+ ''.
+ join("\n",map {
$idx++;
if ($_) {
- my ($name)=split(/\=/,$_);
- unless ($name) { $name='UNKNOWN'; }
+ my ($name,$url)=split(/\=/,$_);
+ unless ($name) { $name=(split(/\//,$url))[-1]; }
+ unless ($name) { $name='EMPTY'; }
'';
}
} split(/\&/,$importdetail));
$idx=0;
- my $targetwindow=join("\n",map {
+ $targetdetail='';
+ my $targetwindow=
+ ''.
+ join("\n",map {
my ($name,$url)=split(/\:/,$resources[$_]);
- unless ($name) { $name='UNKNOWN'; }
+ unless ($name) { $name=(split(/\//,$url))[-1]; }
+ unless ($name) { $name='EMPTY'; }
$targetdetail.='&'.&Apache::lonnet::escape($name).'='.
&Apache::lonnet::escape($url);
$idx++;
- '';
+ $name=~s/\:/\:/g;
+ '';
} @order);
# ----------------------------------------------------- Start simple RAT screen
+ my $editscript=&editscript('simple');
+ my $bodytag=&Apache::loncommon::bodytag(undef,undef,undef,1).
+ &Apache::loncommon::help_open_topic('Sequence_Simple_Editor_Creation').
+ &Apache::loncommon::help_open_faq(6).
+ &Apache::loncommon::help_open_bug('RAT');
+ my %lt=&Apache::lonlocal::texthash(
+ 'sa' => 'Save',
+ 'nt' => 'New Title',
+ 'se' => 'Search',
+ 'im' => 'Import',
+ 'vi' => 'View',
+ 'lm' => 'Load Map',
+ 'ds' => 'Discard Selected',
+ 'ca' => 'Clear All',
+ 'ta' => 'Temporary Assembly Workspace',
+ 'rv' => 'Revert to Last Saved',
+ 'sa' => 'Save',
+ 'mu' => 'Move Up',
+ 'md' => 'Move Down',
+ 're' => 'Rename',
+ 'as' => 'after selected',
+ 'cs' => 'Cut selected',
+ 'ps' => 'Copy selected',
+ 'pas' => 'Paste after selected',
+ );
$r->print(<
-
+$bodytag
$buttons
$errtext